Adding Minimum Standard Deviation
You can set the threshold of the standard deviation to a minimum value. The minimum standard deviation set point is 3 cm during the whole survey.
Changing for a minimum value of 1 cm is recommended if:
|
>
|
system is rigidly fixed |
|
>
|
lever arm are precisely measured (<1cm) |
|
1.
|
Right click on the GPS parameter and select Add Minimum sd. The Minimum sd parameters are displayed. |
|
2.
|
Click on the right of the Axis field and select an axis. |
|
3.
|
Click on the right of the Value field. Enter the corresponding value. |
|
4.
|
Click on the right of the From and To fields. Enter the corresponding values. |